HP-UX AAA Server A.08.00.01 Administrator's Guide

When your network includes multiple HP-UX AAA Servers, click the check box that
precedes each listed connection to specify whether a command applies to the
corresponding server.
When a server command, such as Start, is submitted, it will only be sent to checked
servers. When you retrieve server logging, statistics, active sessions, or account
information, only information from the checked servers will be displayed.
Table 6-2 displays the icons that can appear in Server Manager’s Server Status frame
and describes them briefly.
Table 6-2 Icons in Server Manager’s Server Status Frame
DefinitionIcon
Running - Indicates the server is connected and running.
Stopped - Indicates that the server is connected but is not currently
running.
Failure - Indicates a communication error between the Server Manager
and the AAA server.
Loading and Saving Your Configuration
This section describes the following:
• “Loading and Saving Your Configuration Using RMI Server” (page 91)
• “Enhancing Loading and Saving Performance Using Secure Copy Protocol”
(page 93)
• “Setting up Key-Based Authentication” (page 93)
• “Verifying Key-Based Authentication” (page 95)
Loading and Saving Your Configuration Using RMI Server
AAA configuration files consist of one or more entries. While accessing these files
through the Server Manager interface, the initial screen lists each existing entry and
provides controls to open HTML forms. You can add or modify the AAA server’s
configuration files by entering values in these forms. You must then submit these values
to the program. The fields in the HTML forms include text boxes, drop-down lists, and
other form controls. Fields with bold labels require values for a complete configuration.
Server Manager stores changes you make to the server configuration, but does not
immediately save them on a remote server. When you select the Load Configuration
Loading and Saving Your Configuration 91