HP-UX AAA Server A.08.00.01 Administrator's Guide

35 MIB Objects
RFCs 2619, 2621, and 4672 describe the MIB objects for HP-UX AAA Server. All of the
RADIUS MIB objects that are sent to the management workstation by the server in
response to SNMP requests are read-only, except radiusAuthServConfigReset
and radiusAcctServConfigReset.
Notes:
• When you check the server status, the server increases the
radiusAuthServTotalAccessRequests count but does not increase
radiusAuthServAccessRequests for any client. This behavior results in a
total authentication request count that does not equal the sum of requests received
by individual clients.
• The MIB objects do not support IPv6 addresses.
MIB Objects
Table 35-1 describes the various MIB objects.
Table 35-1 MIB Objects and Definitions
DefinitionMIB Object
SnmpAdminString containing name and
version of the server.
radiusAuthServIdent, radiusAccServIdent
TimeTicks, in hundredths of a second, since
the server was started.
radiusAuthServUptime, radiusAccServUptime
TimeTicks, in hundredths of a second, since
the server’s configuration files were
reloaded.
radiusAuthServResetTime,
radiusAccServResetTime
The only RADIUS MIB objects for SNMP
requests that allows a write operation.
radiusAuthServConfigReset,
radiusAccServConfigReset
Sending an integer value of 2 from the
SNMP workstation to the HP-UX AAA
Server will reload the server’s configuration
files but only if the server was started with
the -H option.
A read operation will return one of the
following integer values:
• 1 (server in some unknown state)
• 3 (server initializing)
• 4 (server currently running)
The number of messages of any type
received through the authentication port.
radiusAuthServTotalAccessRequests
MIB Objects 557