HP-UX AAA Server A.08.00.01 Administrator's Guide

Acct-Input-Packets
How many packets have been received from the port
over the course of this service being provided to a
framed user. Only appears in a stop message.
Acct-Output-Packets
How many packets have been sent to the port in the
course of delivering this service to a framed user. Only
appears in a stop message.
Acct-Terminate-Cause
How the session was terminated. The termination
causes are listed in Table 34-2.
Table 34-2 Session Termination Causes
DescriptionCause
User requested termination of service, for example with LCP Terminate
or by logging out.
User Request
DCD was dropped on the port.Lost Carrier
Service can no longer be provided; for example, user's connection to a
host was interrupted.
Lost Service
Idle timer expired.Idle Timeout
Maximum session length timer expired.Session Timeout
Administrator reset the port or session.Admin Reset
Administrator is ending service on the client, for example prior to
rebooting the client.
Admin Reboot
Client detected an error on the port that required ending the session.Port Error
NAS detected some error (other than on the port) which required ending
the session.
NAS Error
NAS ended session for a non-error reason not otherwise listed here.NAS Request
The NAS ended the session in order to reboot.NAS Reboot
Client ended session because resource usage fell below low-water mark
(for example, if a bandwidth-on-demand algorithm decided that the
port was no longer needed).
Port Unneeded
Client ended session in order to allocate the port to a higher priority
use.
Port Preempted
Client ended session to suspend a virtual session.Port Suspended
Client was unable to provide requested service.Service Unavailable
NAS is terminating current session in order to perform callback for a
new session.
Callback
554 Attribute-Value Pairs