HP-UX AAA Server A.08.00.01 Administrator's Guide

Table 30-5 Common Authentication Failure Problems (continued)
TroubleshootingProblem
dhcpRelayAatv_ActionFunction: Request failed. DHCP Relay is
disabled. Verify DHCP Server-Name/ IP-Address at DHCP server
Log MessageUnable to
authenticate
properties in the Server Manager at Server Properties > DHCP
Relay Properties or in /etc/opt/aaa/aaa.config Authentication: 24/0
'<user name>' via <host name/IP address> from <host
name/IP address> port <port no> Outbound - FAILED
Problem allocating IP address -- total 0, holding 0
The DHCP configuration in the /etc/opt/aaa/aaa.config
file is incorrect.
Cause
Manually edit the /etc/opt/aaa/aaa.config file and modify
the value <value> or keyword <keyword>
Solution
Or
1. Navigate to the DHCP Relay screen through the Server
Properties screen of the Server Manager.
2. Ensure that you specify a correct entry for the DHCP server
and port.
3. If you have modified the configuration, save the configuration
to the HP-UX AAA Server and restart it.
dhcpRelayAatv_InitFunction: ERROR attribute not in
'<attribute>' dictionary dhcpRelayAatv_InitFunction: DHCP
Relay disabled: No DHCP server configured. check dictionary
Log Message
An attribute used for DHCP configuration in /etc/opt/aaa/
aaa.config was not found in the dictionary file.
Cause
Manually edit the /etc/opt/aaa/dictionary file and add
the attribute <attribute>.
Solution
Troubleshooting the HP-UX AAA Server 489