HP-UX AAA Server A.08.00.01 Administrator's Guide

Figure 27-5 Flow of the Proxy Ingress Policy
Useful Attributes for Policy Conditions
Table 27-7 lists and describes attributes that are typically used for policy group
conditions or replies.
Table 27-7 Attributes Typically Used in Policy Group Conditions and Replies
DescriptionAttribute
This attribute contains the code from the RADIUS packet header.
It can have an Access-Request or an Accounting-request
value.
Interlink-Packet-Code
This attribute contains an event which indicates the type of the
request. This is also the event which will be delivered to the FSM
Interlink-Proxy-Action
(as per the default FSM). If this policy returns ACK, it can have one
of the following values:
• AUTHEN - This value indicates a normal access request.
• AUTH_ONLY - This value indicates an Authenticate-Only type
request.
• AUTHENTICATE- This value indicates a proxied access request,
or an inner authentication request in the case of tunneled EAP
methods like TTLS or PEAP.
• ACCT - This value indicates an accounting request.
• LAS_ACCT - This value indicates a proxied accounting request.
• MGT_POLL - This values indicates a server status request
(radcheck request)
Invoking a Policy 431