HP-UX AAA Server A.08.00.01 Administrator's Guide

for a user name and password, you must enter the values specified during
installation.
4. From the navigation tree, click Server Properties.
5. On the Server Properties screen that appears, select SNMP Properties.
6. On the SNMP Server Properties screen that appears, select the Yes radio button
and click Modify.
7. From the navigation tree, click Save Configuration.
8. From the navigation tree, click Administration.
9. Click Start.
If the server successfully starts, a green GO icon appears next to the name of the
server in the Status Frame (in the lower left corner of the programs interface). The
AAA subagent will check the appropriate sockets and TCP ports for an active
master agent. When the subagent detects the running master agent, it will register
with the master agent, and you can begin to send SNMP requests from the
workstation to the server.
10. To configure the SNMP manager to monitor the RADIUS information, complete
the required steps for your SNMP manager.
NOTE: You must specify the same context name that you used to start the
RADIUS server while configuring your SNMP manager to monitor RADIUS
information. The SNMP manager uses the context name to distinguish one HP-UX
AAA Server from another, on the same host. For more information on context
name, see Table 4-2 (page 75).
382 Simple Network Management Protocol (SNMP) Support