HP-UX AAA Server A.08.00.01 Administrator's Guide

2. To start the HP-UX AAA Server using the HP-UX AAA Server Admin Tool, enter
the following command at the HP-UX prompt:
# /opt/aaa/bin/rad_admin.sh
The interactive mode starts.
3. Enter the group ID.
4. Enter the HP-UX AAA Server ID.
5. Specify the operation you want to perform.
The operation starts.
NOTE: It is recommended that you use the HP-UX AAA Server Manager to manage
multiple HP-UX AAA Servers. For more information on how to perform the tasks using
HP-UX AAA Server Manager, see “Administering HP-UX AAA Servers Using HP-UX
AAA Server Manager” (page 271).
Disaster Recovery of the HP-UX AAA Server Manager
The HP-UX AAA Server supports disaster recovery of HP-UX AAA Server Manager.
If the host running the HP-UX AAA Server Manager crashes due to system failure, the
HP-UX AAA Server Manager can be restored on the same or different host. You must
back up a set of HP-UX AAA Server Manager configuration files periodically and
restore them on the host where you want to launch the HP-UX AAA Server Manager.
To perform the disaster recovery of HP-UX AAA Server Manager, complete the
following steps:
1. Deploy the AAA solution using HP-UX AAA Server Manager.
2. To backup the HP-UX AAA Server Manager configuration files from the host
running the HP-UX AAA Server Manager to a backup host, enter the following
command at the HP-UX prompt:
1. scp /opt/hpws/tomcat/webapps/aaa/aaalog/groups.config\
/opt/hpws/tomcat/webapps/aaa/aaalog/AU.radhosts \
/opt/hpws/tomcat/webapps/aaa/WEB-INF/gui.properties \
<user-account>@<backup-host>:/<backup-path>
284 Configuring HP-UX AAA Server for Scalability and High-Availability