HP-UX AAA Server A.08.00.01 Administrator's Guide

NOTE: To perform a cloning operation, the target server must already exist with
configured values. After the successful completion of the cloning operation, the source
and the target servers will have the same configuration files.
You can reduce the time required to load a configuration from a HP-UX AAA Server
or to save a configuration to multiple HP-UX AAA Servers by using the Secure Copy
Protocol (scp). For more information on scp, see “Enhancing Loading and Saving
Performance Using Secure Copy Protocol”.
To clone server2 on server1, complete the following steps:
1. Click Server Connections on the top left window.
2. Select the group in the drop-down menu to which the server belongs, under Select
a group for administration.
3. Click Load Configuration on the left window. The Load Configuration page is
displayed, as shown in Figure 18-7.
Figure 18-7 Selecting the Server for Loading
4. Select the HP-UX AAA Server whose configuration files you want to clone, and
click Load. When the loading operation is completed, the message is displayed,
as shown in Figure 18-8.
Figure 18-8 Loading Configuration Completed
280 Configuring HP-UX AAA Server for Scalability and High-Availability