HP-UX AAA Server A.08.00.01 Administrator's Guide

Table 17-20 Configuration Parameters of aatv.3GPP-Milenage{} Block (continued)
DescriptionParameter
warning message in the logfile. Milenage
specifies the default value.
If not explicitly configured, the default value is
0x00000000.00000000.00000000.00000002.
128-bit computation constant. C4 must have odd
parity. Use of a value with even parity generates a
C4
warning message in the logfile. Milenage
specifies the default value.
If not explicitly configured, the default value is
0x00000000.00000000.00000000.00000004.
128-bit computation constant. C5 must have odd
parity. Use of a value with even parity generates a
C5
warning message in the logfile. Milenage
specifies the default value.
If not explicitly configured, the default value is
0x00000000.00000000.00000000.00000008.
Rotation constant. The valid range is 0 to 127.
Milenage specifies the default value.
R1
If not explicitly configured, the default value is 64.
Rotation constant. The valid range is 0 to 127.
Milenage specifies the default value.
R2
If not explicitly configured, the default value is 0.
Rotation constant. The valid range is 0 to 127.
Milenage specifies the default value.
R3
If not explicitly configured, the default value is 32.
Rotation constant. The valid range is 0 to 127.
Milenage specifies the default value.
R4
If not explicitly configured, the default value is 64.
Rotation constant. The valid range is 0 to 127.
Milenage specifies the default value.
R5
If not explicitly configured, the default value is 96.
Plug-in module that supports the selection of
Milenage variant #1 or #2. A3-Variant must be 1
A3-Variant
or 2. For information on whether an alternative
SRES derivation function is required, see “Creating
Plug-ins for AATVs” (page 445). The AKA algorithm
is unaffected by this parameter.
If not explicitly configured, the default value is 1.
266 Configuring EAP-SIM and EAP-AKA Authentication Methods