HP-UX AAA Server A.08.00.01 Administrator's Guide

Then …
If you have
configured...
Replace the <realm> variable in the following syntax with the inner realm name
configured in Step 1:
if ((count (User-Name) > 0) && (substr (User-Name after "@") = "<realm>"))
{
Tunneled
realms with
different
inner and
insert Otp-ActionId = 16
outer
exit "ACK"
}
realms for
EAP
authentication
Tunneled
realms with
1. Delete the following (default) condition in the request-ingress.grp file:
if ((count (User-Name) > 0) && (substr (User-Name after "@") = "<realm>"))
{
same inner
insert Otp-ActionId = 112
and outer
exit "ACK"
}
realms for
EAP
authentication
2. Based on the EAP authentication method you have configured, add one of the
following conditions in the /etc/opt/aaa/request-ingress.grp file, and
replace the <realm> variable with the inner realm name configured in step 1:
• If you have configured the realm for PEAP (EAP-GTC), add the following
condition:
if ((count (User-Realm) > 0) && (User-Realm = "<realm>/peap"))
{
insert Otp-ActionId = 16
exit "ACK"
}
• If you have configured the realm for TTLS (PAP) or TTLS (MS-CHAP v2), add
the following condition:
if ((count (User-Realm) > 0) && (User-Realm = "<realm>/ttls"))
{
insert Otp-ActionId = 16
exit "ACK"
}
4. In the /etc/opt/aaa/reply-egress.grp file, replace the <realm> variable
with the configured realm name in step 1 as follows:
if ( (count (User-Realm) > 0) && (User-Realm = “<realm>”) )
Use the following rules while replacing the <realm> variable, with the realm
name:
Then…If you have configured …
Replace <realm> with the realm name
configured in step 1
The realm for RADIUS standard password
authentication
Replace <realm> with the inner realm name
configured in step 1
Tunneled realms with different inner and outer
realms for EAP authentication
196 OATH Standards-Based OTP Authentication