HP-UX AAA Server A.08.00.01 Administrator's Guide

Table 9-2 Options for Forwarding Requests
DescriptionOption
All requests originating from the realm listed in this drop-down list will be
forwarded to the remote server. To add a realm to the list, select Add Realm
Realms to forward
from the list. To modify or delete a listed realm, select the realm name from
the drop-down list. When you add or modify a realm, you specify the realm
name and whether its accounting messages should be forwarded to the
remote server. By default, accounting messages are forwarded to the proxy
server.
This port number value overrides the servers startup switches that specify
the UDP port used to relay authentication requests. The default (when no
value is entered in this field and no startup switch is specified) is 1812.
Authentication relay
port
This port number value overrides the servers startup switches that specify
the UDP port used to relay accounting requests. The default (when no value
is entered in this field and no startup switch is specified) is 1813.
Accounting relay
port
Enter the UDP port number of the dynamic authorization server to which
the HP-UX AAA Server must send the dynamic authorization requests. The
default value is 3799.
Dynamic
Authorization Relay
Port
Enter the number of client retry requests the HP-UX AAA Server must send
to perform a client function, such as Disconnect or Change of Authorization.
The default value is 2.
Retry Count
Specifies the time interval between two successive client requests. The HP-UX
AAA Server sends a client retry request at the end of the specified retry
Retry Interval
interval if the initial request does not receive a response from the respective
server. The default value is 3.
When receiving a response from a remote server, Yes will instruct the server
to append all the forwarded A-V pairs to new A-V pairs included in the
Append Attributes
response. This setting is useful when a remote server does not return all of
the A-V pairs that it received.
3. Click Create.
4. From the Navigation pane, click Save Configuration.
5. On the Save Configuration screen that appears, click Save.
CAUTION: Clicking Save saves the entire server configuration (access devices,
proxies, local realms, users, and server properties) to the servers you specify.
NOTE: By default, accounting requests originating from the realm are also forwarded
to the remote server.
Forwarding Authentication Requests to a Remote Server
To forward authentication requests to a remove server, complete the following steps:
118 Configuring Proxies