HP-UX AAA Server A.07.01 Administrator's Guide

1. Click to display the Add Server screen.
The Add Connection screen appears as shown in Figure 6-2.
Figure 6-2 The Add Connection Screen
2. In the Server Attributes form, enter your server’s attributes according to the format
shown in Table 6-1
Table 6-1 Fields in the Connection Attributes Form
AttributesField Name
The identifying string of a remote serverName
The client IP address or DNS name. Both traditional IP (IPv4), and IPv6
address formats are supported. The HP-UX AAA server can resolve
the DNS name format entries to both IPv4 and IPv6 addresses.
Domain Name or IP
Address
Enter an IPv4 address in dotted-quad notation. Enter an IPv6 address
in IPv6 Literal format notation. For example:
IPv4 address — 192.0.2.0
IPv6 address — fedc:ba98:7654:3210:fedc:ba98:7654:3210
3. Click Create to create the server connection.
Click Cancel to return to the Managed Servers screen without creating a new server
connection.
IMPORTANT: When adding a connection to a new remote server, you must start
the RMI objects on that host to allow Server Manager to administer the server. You
can start the RMI objects from the command line with the following command:
$ /opt/aaa/remotecontrol/rmistart.sh
Modifying Connection Attributes
In the Server Connections screen, select the icon corresponding to the server whose
attributes you wish to modify. The Modify Connection screen appears as shown in
Figure 6-3.
Modifying Connection Attributes 79