HP-UX AAA Server A.07.01 Administrator's Guide

Testing the Installation
To test the server installation quickly, perform the following procedure using Server
Manager:
• Add a loopback connection to a AAA server
• Start the AAA server
• Check the status for a response
To Test the Installation
Complete the following steps to test the server installation:
1. Connect to Server Manager and start the AAA server. See “Accessing the Server
Manager” (page 62).
2. From the navigation tree, click the Server Connections link and then click the
Connect to Server link.
3. In the Add Connection screen that opens, enter the values for you server as shown
in the following format:
Name The identifying string of a remote server.
Domain Name or IP Address The IP address (traditional IPv4 address in
dotted-quad notation, or IPv6 address in
IPv6 literal format notation), or valid
Domain Name System (DNS) host name of
the AAA server that the connection maps
to.
Example: IPv4 address- 192.0.2.0
IPv6 address-
fedc:ba98:7654:3210:fedc:ba98:7654:3210
Domain Name- example.org
4. Click Create.
5. Verify the server is listed and selected in the Server Status frame.
6. From the navigation tree, click Administration.
7. Click Start.
8. Verify the server has started. A green “GO” icon in the Server Status frame indicates
the server is running.
9. Verify the server is selected in the Server Status frame and then select the Status
option.
10. Check Server Manager’s Message Frame for the status reply. The following reply
at the bottom of the Message Frame indicates the server is running correctly:
“<server name> (port#)” is responding
Testing the Installation 63