HP-UX AAA Server A.07.01 Administrator's Guide

• L2TP (Layer Two Tunneling Protocol)
• ATMP (Ascend Tunnel Management Protocol)
• VTP (Virtual Tunneling Protocol)
• AH (IP Authentication Header in the
Tunnel-mode)
• IP-IP-Encap (IP-in-IP Encapsulation)
• MIN-IP-IP (Minimal IP-in-IP Encapsulation)
• ESP (IP Encapsulating Security Payload in the
Tunnel-mode)
• GRE (Generic Route Encapsulation)
• DVS (Bay Dial Virtual Services)
• IP-IP (IP-in-IP Tunneling)
Tunnel-Medium-Type
Transport medium to use when creating a tunnel
for those protocols (e.g., L2TP) that can operate
over multiple transports. Valid values for this
attribute are:
• IPv4 (IP version 4)
• IPv6 (IP version 6)
• NSAP
• HDLC (8-bit multidrop)
• BBN-1822 (1822)
• IEEE-802 (All 802 media plus Ethernet
“canonical format”)
• E-163 (POTS)
• E-164 (SMDS, Frame Relay, ATM)
• F-69 (Telex)
• X-121 (X.25, Frame Relay)
• IPX
• Appletalk
• DecnetIV
• Banyan-Vines
• E-164-NSAP
Tunnel-Client-Endpoint
Address of the client that initiated the tunnel.
Tunnel-Server-Endpoint
Address of the server that provides the tunnel to
the user.
Tunnel-Password
This password is not used for authentication by
the AAA server but is a separate check made for
access to the machine specified by
Tunnel-Server-Endpoint.
412 Attribute-Value Pairs