HP-UX AAA Server A.07.01 Administrator's Guide

Framed-Compression
This attribute indicates a compression protocol to be
used for the link. Valid values for this attribute are:
• None
• Van-Jacobsen-TCP-IP
• IPX-Header-Compression
Framed-Route
This attribute provides routing information to be
configured for the user on the NAS. This attribute is used
in an IPv4 environment.
Framed-IPv6-Route
This attribute provides routing information to be
configured for the user on the NAS. This attribute is used
in an IPv6 environment.
Framed-Pool
This attribute is sent by the AAA Server to the NAS and
contains the name of an assigned pool that must be used
to assign an IPv4 address for the users. If a NAS does
not support multiple address pools, the NAS must ignore
this attribute. Address pools are usually used for IP
addresses, but can be used for other protocols if the NAS
supports pools for those protocols.
Framed-IPv6-Pool
This attribute is sent by the AAA Server to the NAS and
contains the name of an assigned pool that must be used
to assign an IPv6 address for the user. If a NAS does not
support multiple address pools, the NAS must ignore
this attribute. Address pools are usually used for IP
addresses, but can be used for other protocols if the NAS
supports pools for those protocols.
Framed-IPX-Network
This attribute indicates the IPX Network number to be
configured for the user.
Tunneling Attributes
When a tunneling attribute is used as a reply item, the AAA server will return the A-V
pair, which the NAS will use as instruction for establishing the tunnel. The server may
recognize hints in an Access-Request. If hints appear in an Access-Request for a user
with tunneling attributes as reply items, the server will use the tunneling keyword in
the aaa.config file to determine what information will be used to establish the tunnel.
When you use a tunneling attribute as a check item, you are controlling access to the
tunnel server based on what the user is requesting.
Tunnel-Type
Indicates the tunneling protocol to use when
establishing the tunnel. Valid values for this
attribute are:
• PPTP (Point-to-Point Tunneling Protocol)
• L2F (Layer Two Forwarding)
Reply Items 411