HP-UX AAA Server A.07.01 Administrator's Guide

Table 28-2 Common Problems with HP-UX AAA Server Startup (continued)
TroubleshootingProblem
doconfig: init_fsm() failed rad_fsminit: invalid action name:
'invalid' line <line no>
Log MessageFSM-related
problems
The FSM file /etc/opt/aaa/radius.fsm contains an invalid
action specified at line <line no>.
Cause
Edit the /etc/opt/aaa/radius.fsm to specify a valid action
name at line <line no>.
Solution
See “Actions ” (page 276)for more information on specifying
actions.
doconfig: init_fsm() failed rad_fsminit: duplicate state: line
<line no> <date> <time>: ‘state’ <date> <time> doconfig:
init_fsm() failed
Log Message
The FSM file /etc/opt/aaa/radius.fsm contains a duplicate
state specified at line line no.
Cause
Edit the /etc/opt/aaa/radius.fsm to remove the duplicate
state at line <line no>.
Solution
See “Event Names ” (page 273) for more information on
specifying events.
vend_init: Missing Vendor number on line <line no> of
vendors dict_init: Could not initialize the 'vendors' file
Log Message
The /etc/opt/ aaa/vendors file is missing a vendor number
entry on line line no.
Cause
Edit the /etc/opt/aaa/vendors file to specify the vendor
number in line no.
Solution
dict_init: Invalid value <invalid> in column <column no>
at line <line no> in /etc/opt/aaa/dictionary. Specify <correct
value range>.
Log Message
The /etc/opt/aaa/dictionary file contains an invalid value
at line line no.
Cause
Edit the /etc/opt/aaa/dictionary file and specify a valid
value as specified by <correct value range>.
Solution
Troubleshooting Bind Errors at HP-UX AAA Server Startup
This section describes how to troubleshoot problems when you cannot start the HP-UX
AAA Server because of bind errors.
If you are unable to start the HP-UX AAA Server, complete the following steps:
342 Troubleshooting Procedures