HP-UX AAA Server A.07.01 Administrator's Guide

Local Users File Properties
Enable (Yes) to enable case-insensitive searching in the default users file. The default
setting is No (case sensitive search is disabled by default).
ProLDAP Properties
Clicking ProLDAP Properties takes you to the ProLDAP Properties screen where you
can modify the properties described in Table 11-5.
Table 11-5 ProLDAP Properties
DescriptionOption
Determines whether OpenLDAP debug messages
must be logged in the HP-UX AAA Server
Debug
radius.debug file. To disable logging OpenLDAP
messages, enter a value of 0. To enable logging,
enter a value of -1. By default, logging is disabled.
Number of milliseconds that the HP-UX AAA
Server waits for an LDAP server while trying to
Connection Timeout (milliseconds)
establish the TCP connection. The default value is
300 milliseconds.
Number of seconds that an LDAP connection
remains open if the HP-UX AAA Server is unable
Timeout
to successfully perform any LDAP operation. The
default value is 60 seconds.
Number of seconds that the HP-UX AAA server
waits before attempting to reconnect to an LDAP
Retry Wait
server, if there are no active connections. The default
value is 1 second.
Used if any realm is configured with two or more
LDAP Servers and at least one of them is connected.
Retry Wait for Alternate Servers
Specifies the number of seconds the HP-UX AAA
Server waits before attempting to reconnect to the
LDAP servers that are not connected. The default
value is 60 seconds.
Used if any of the LDAP directories are configured
to use SSL. Specifies the path of the file that contains
Certificate Authority File
one or more CA certificates used to authenticate
LDAP directory server certificates. There is no
default value.
Used if any of the LDAP directories are configured
to use SSL. Specifies the path of a directory that
Certificate Authority Directory
contains Certificate Authority Certificates in
separate individual files. If the Certificate Authority
file is specified, Certificate Authority file is always
used before Certificate Authority directory. There
is no default value.
128 Modifying Server Properties