HP-UX AAA Server A.07.01 Administrator's Guide

Table 11-3 Message Handling Properties (continued)
FunctionOption
The maximum number of simultaneous authentication requests
to be stored in a retransmission queue. When this limit is
Max. Authentication Requests
exceeded, all new authentication requests are discarded. HP
recommends that this value matches the value used for Max.
Accounting Requests. If no value is specified, 1000 will be used.
NOTE: When this authentication queue limit is exceeded, the
server stops responding to the Status command.
The time in seconds each authentication request should be held
after the Hold Replies time. This option is used for debugging
purposes only. If no value is specified, 0 is used.
Hold Authentication Requests
(optional)
Serves as a debugging function for certain custom HP-UX AAA
Servers that might transmit very large packets, and helps to
Max. Send Message Size (optional)
debug code written to prevent an excessively large packet from
corrupting the server.
Serves as a debugging function for certain custom HP-UX AAA
Servers that might transmit very large packets, and helps to
Max. Receive Message Size
debug code written to prevent an excessively large packet from
corrupting the server.
SNMP Properties
Clicking the SNMP Properties link takes you to the SNMP Properties screen where you
can modify the Enable SNMP Support property.
Enable SNMP Support
When this option is set to Yes, the HP-UX AAA Server automatically checks the localhost
(and not the network) for an SNMP master agent. master agent to communicate with,
and the server can be monitored by an SNMP workstation. When this option is set to
No, the server does not communicate with an SNMP master agent and cannot be
monitored by an SNMP workstation. The default value is No.
Tunneling Properties
Clicking the Tunneling Properties link takes you to the Tunneling Properties screen
where you can modify Tunneling Reply Items.
SNMP Properties 125