HP-UX Workload Manager A.03.02.xx Release Notes for HP-UX 11i v1, HP-UX 11i v2, and HP-UX 11i v3

HP-UX Workload Manager Release Notes

Compatibility information and installation requirements

Step 1. Verify that HP-UX is up-to-date

HP suggests that as part of your systems’ ongoing maintenance and support, the

systems be kept up-to-date through the HP IT Resource Center’s Support Plus

program. This program delivers quarterly patch bundles via the web and as part of

the quarterly AR media. To register, go to the following location:

http://itrc.hp.com

Select the patch/firmware database link and register to create an account and log

in, as instructed. After logging in, scroll down to the “find standard patch bundles”

section and select “HP-UX patch bundles”. The bundles of interest are “Quality

Pack” and “Support Plus”.

For HP-UX 11i v1 (B.11.11), the recommended bundles are described in the

following table:

If you are using HP-UX 11i v1 (B.11.11) and are interested in using processor sets

(PSETs), you can download software (to support processor sets) from the following

location:

http://www.hp.com/go/wlm

Select the Patches/support link and search for “processor sets”. This software also

corrects several problems (see section “System panic when PRM is enabled; install

failure in absence of PRM when certain kernel patches are present” on page 9).

NOTE Install GOLDQPK11i before installing the processor sets

software—unless you are using a depot to install them at the same

time.

Table 1-2 HP-UX 11i v1 (B.11.11) general support patches

HP-UX 11i v1

patch

Description

GOLDQPK11i Defect-fix patches for HP-UX 11i v1 on HP 9000 workstations and

servers

(When placed in your local depot, this bundle appears with the

names GOLDBASE11i and GOLDAPPS11i.)

HWEnable11i Required hardware enablement patches for all HP-UX 11i v1

workstations and servers