HP-UX Workload Manager A.03.00 Release Notes for HP-UX 11i v1 and HP-UX 11i v2

HP-UX Workload Manager Release Notes

Compatibility information and installation requirements

Installation procedure

If you are installing WLM from the quarterly Application Release (AR) CD-ROM, use the

procedure in this section to minimize system reboots.

To install your software, use the SD-UX swinstall command. For information on installing

using a GUI, see “Using the swinstall Graphical User Interface (GUI)” on page 38.

NOTE If you are upgrading your version of WLM, after installation, you must

explicitly restart HP-UX WLM with the wlmd -a or wlmd -A commands.

The following steps give an overview of the HP-UX WLM A.03.00 installation process:

Step 1. Verify that HP-UX is up-to-date

Step 2. (Optional) Configure long hostnames

Step 3. Determine what patches are needed

Step 4. (Optional) Create a software depot to minimize system reboots

Step 5. Disable PRM from starting automatically

Step 6. (Optional) Disable PRM’s remote configuration daemon

Step 7. Install patches and install/upgrade WLM

Step 8. Check the file /var/adm/sw/swagent.log

Step 9. (Optional) Ensure you have the proper version of GlancePlus

Step 10. (Optional) Install files for integration with HP Systems Insight Manager

Step 11. (Optional) Merge new /etc/rc.config.d/wlm file with your modified file

These steps are discussed in detail below.