HP-UX Workload Manager A.02.03.01 Release Notes for HP-UX 11i V1.0 and HP-UX 11i V2.0

HP-UX Workload Manager Release Notes

Known problems and workarounds

Automatic activation of iCOD processor without authorization

Issue

An iCOD processor was automatically activated without customer

authorization.

Workaround

Please contact your HP representative.

If you have iCOD or Pay Per Use (PPU) software installed, either:

• Do not use WLM’s vPar (virtual partitions) management, or

• Use vPars version A.03.01 or later

“wlmd -k failed,” “wlmpard -k failed,” “wlmcomd -k failed” messages

Issue

You may get one of the following messages when using -k with a WLM

daemon:

wlmd -k failed: Resource temporarily unavailable

wlmpard -k failed: Resource temporarily unavailable

wlmcomd -k failed: Resource temporarily unavailable

Workaround

When you get one of these messages, the -k most likely did succeed—but not

as quickly as expected. You can verify using the ps command and issue your

shutdown command again if needed.