HP-UX WBEM SAS Provider release notes (5900-1806, June 2011)

Table 7 Defects Fixed in the HP-UX 11i v3 OS (continued)
DescriptionDefect ID
Table 8 (continued)
Earlier Severity LevelCurrent Severity Level
Subsystem
GroupOperationalStatus
Unknown(0) and No
Contact(12).
• Stopping(9)
• In Service(11)
• Dormant(15)
• Power Mode(18)
Has higher severity
level than the states
Has less severity level than the
states OK(2) and
Completed(17).
• Unknown(0)
• No Contact(12)
OK(2) and
Completed(17).
Has the lowest
severity level.
Has the highest severity level.
• OK(2)
• Completed(17)
In the previous release, cimprovagt program generated a core during unload of
the Provider. The program was terminated with signal 11, segmentation fault.
QXCR1001051369
In the current release, this problem is fixed.
Known Problems, Workarounds, Limitations
There are no known problems and workarounds in the current release.
Following is the limitation of the SAS provider:
• SAS is a read-only provider and hence does not allow users to modify, create, or delete
instances.
Related Documentation
Table 9 lists the available documentation for the WBEM providers:
Table 9 WBEM Provider Related Documents
LocationDescription
http://www.dmtf.org/education/cimtutorial.phpCIM Tutorial
http://software.hp.com
and
Information about HP WBEM Services
http://www.hp.com
http://www.openpegasus.org/uploads/40/3452/WBEMIndications.pdfOverview of the Indication Schema
Datasheets of all the providers are installed along with the product at the following
location on the system:/opt/<provider-name>/doc
Provider Datasheets
The datasheets are also available at the following location:
www.hp.com/go/hpux-networking-docs and select HP-UX 11i WBEM Software
collection.
Known Problems, Workarounds, Limitations 9