HP-UX WBEM RAIDSA Provider release notes (5900-1807, June 2011)

ManualsBrandsHP ManualsSoftwareHP-UX 11i WBEM Software

Table 7 Defects Fixed in the HP-UX 11i v3 OS (continued)

In the previous release, the

HPUXRAIDSANativeIndicationProviderModule is not supported on

legacy Integrity systems.

QXCR1001048147

In the current release, the

HPUXRAIDSANativeIndicationProviderModule is supported on legacy

Integrity systems. The monitors disk_em and msamon_sas no longer generate

events on legacy Integrity systems.

The consolidated status provider displays the overall status of the IO subsystem

based on the GroupOperationalStatus property severity level. The severity

QXCR1001066416

levels associated for the GroupOperationalStatus property values during

the previous release and the current release are tabulated below.

Table 8

Earlier Severity LevelCurrent Severity Level

Subsystem

GroupOperationalStatus

Has higher severity

level than the states

Has less severity level than

the states Unknown(0) and

No Contact(12).

• Other(1)

• Starting(8)

Unknown(0) and

No Contact(12).

• Stopping(9)

• In Service(11)

• Dormant(15)

• Power Mode(18)

Has higher severity

level than the states

Has less severity level than

the states OK(2) and

Completed(17).

• Unknown(0)

• No Contact(12)

OK(2) and

Completed(17).

Has the lowest

severity level.

Has the highest severity

level.

• OK(2)

• Completed(17)

In the previous release, cimprovagt program generated a core during unload

of the Provider. The program was terminated with signal 11, segmentation

fault.

QXCR1001051369

In the current release, this problem is fixed.

Known Problems, Workarounds, Limitations

There are no known problems and workarounds in the current release.

Following is the limitation of the RAIDSA provider:

• It is a read-only provider and hence does not allow users to modify, create, or delete instances.