HP-UX WBEM nPartition Provider Data Sheet

uint32 SetLED( uint8
newState,
string
MpPassword )
See Table 14. See Table 14.
uint32 MakeID( uint32
CabinetID,
uint8
IOBayNumber,
uint8
SlotNumber )
Return the correct ID for a
chassis slot in cabinet
CabinetID, I/O bay
IOBayNumber within that
cabinet, and slot number
SlotNumber within that I/O
bay.
None
HP_NParComponent (Abstract Class)
HP_NParComponent is a subclass of HP_NParPotentialErrorObject. This is an
abstract base class for the HP_NParCell and HP_NParIOChassis classes. No
instances exist. Queries to get names or instances of this class are not directly
supported.
Table 19. HP_NParComponent properties
Property Name Property Inheritance
Property Value (and data
source)
uint32 SlotID [Key] Local
ID of the HP_NParSlot in
which this component is
located.
uint8 ComponentStatus Local
Status of this component.
Values are: Unknown(0),
Other(1), Powered Off(2),
Powering On(3), Inactive(4),
Active(5). A component is
powering on when power has
been turned on, but it is still
performing power-on self-
tests (POST). A component
is Inactive if it has completed
POST, but has not joined its
nPartition. This may be
because the component is not
assigned to a nPartition, if it
is assigned to a nPartition and
the nPartition is not active, if
the component failed during
nPartition boot, if the
component was assigned to