HP-UX WBEM nPartition Provider Data Sheet

on the nPartition where the
provider is running. For a
remote complex, the user must
have previously configured the
provider for that remote
complex by creating a
HP_NParRemoteComplex
object containing a valid
password for the remote
service processor. Note that
modification authority is
subject to the restrictions
implied by the property
NParConfigPrivilegeIsEnabled.
boolean
InterpartitionSecurityEnabled
Local
Fasle if nPartition
Configuration Privilege is set
to “unrestricted” for this
complex. In this case, the
service processor will permit
configuration changes to
nPartitions other than the one
from which the request is
made.
When true, the privilege
is set to “restricted”, and the
service processor will permit
configuration changes only to
the nPartition from which the
request was made. This
applies only when the request
is made for the local complex
where the provider is running.
Configuration changes are
never restricted for a remote
complex, where the
requirement for a password
affords additional security.
String MpPassword HP_NParProfile See Table 3.
sint32 ErrorCode HP_NParPotentialErrorObject See Table 1.
string ErrorMessage HP_NParPotentialErrorObject See Table 1.
string LockOwner HP_NParPotentialErrorObject See Table 1.
datetime LockTime HP_NParPotentialErrorObject See Table 1.
NOTE: PA-RISC platforms support ModelString, and do not support
CreatorProductName or OEMProductName. Itanium®-based platforms support