HP-UX WBEM Mass Storage Providers Release Notes, September 2008

connected is also configured with 1000 Mbps full-duplex speed. This property is supported

on both HP-UX 11i v2 and HP-UX 11i v3 OS. This property can have one of the following

three values: On, Off, and 1000fd.

The SMH web page displays the Autonegotiation property under the Network Information

subsystem.

• The LAN provider displays an additional operational status. The following operational

status is also displayed for LAN cards:

— Inservice — This state is displayed for a LAN card on the SMH web page when the

following operations are in progress for the card:

◦ Resetting the card

◦ Changing card parameters

◦ Changing card address

◦ Changing card features

NOTE: The above operations can be performed by the system administrator or by a

normal user who has root privileges.

• IOTree Consolidated Status provider is shipped along with the IOTree Indication provider

product bundle on HP-UX 11i v3 OS. This provider obtains consolidated status of the PCI

I/O subsystem. The consolidated status is displayed on the SMH web page under IO

subsytem.

Installing HP-UX WBEM Providers

The latest mass storage WBEM providers depot is available for download on the OE media. It

is also available on the Web for download at: http://h18013.www1.hp.com/products/servers/

management/hpsim/dl_hpux.html#managed

NOTE: The mass storage WBEM providers depot available on the Web does not support CSP

and IP features for all the related subsystems.

For more information on installing the providers, see the Website at: http://h20293.www2.hp.com/

Hardware Requirements and OS Support

Table 1-1 lists the platform support information for all the WBEM Providers.

Table 1-1 WBEM Providers Supported Platform and OS Requirement

Mode of DeliverySupported OSProduct NameProvider