HP-UX WBEM Fibre-Channel Provider Release Notes (5900-1603, April 2011)

Table 9 Defects Fixed in the HP-UX 11i v3 OS (continued)
DescriptionDefect ID
In the previous release, threshold limit of 4 for postgres connections can be exceeded by
HPUXFCNativeIndicationProviderModule when excessive errors are generated from
QXCR1001083290
a faulty component. This potentially leads to core dump on legacy Integrity and BL870c i2
platforms.
In the current release, the defect is fixed.
In the previous release, the HPUXFCNativeIndicationProviderModule leaks memory
leak, on legacy Integrity and BL870c i2 platforms, when the module receives an evm
notification about the IO subsystem status change.
QXCR1001075851
In the current release, this defect is fixed.
Defects Fixed in B.11.31.1103.14 Release
In the previous release, the HPUXFCNativeIndicationProviderModule is not supported
on legacy Integrity systems.
QXCR1001048147
In the current release, the HPUXFCNativeIndicationProviderModule is supported on
legacy Integrity systems. The monitors dm_ql_adapter and dm_fclp_adpater no longer
generate events on legacy Integrity systems.
In the previous release, the HPUXFCNativeIndicationProviderModule does not generate
events related to HP 580151-B21 10Gb PCIe 2-port OCm10102-F-HP FCoE
Mezzanine adapter on BL870c i2 platform.
QXCR1001021582
In the current release, the HPUXFCNativeIndicationProviderModule generate all
events related to HP 580151-B21 10Gb PCIe 2-port OCm10102-F-HP FCoE
Mezzanine adapter on BL870c i2 platform.
In the previous release, when the evweb eventviewer command is run on legacy and
PA-RISC platforms, event descriptions of events generated by the
HPUXFCIndicationProviderModule may contain special characters.
QXCR1001092354
This defect is fixed in the current release, and the event descriptions do not contain these
special characters.
The consolidated status provider displays the overall status of the IO subsystem based on the
GroupOperationalStatus property severity level. The severity levels associated for the
QXCR1001066416
GroupOperationalStatus property values during the previous release and the current
release are tabulated below.
Table 10
Earlier Severity LevelCurrent Severity Level
Subsystem
GroupOperationalStatus
Has higher severity level
than the states
Has less severity level than the
states Unknown(0) and No
Contact(12).
• Other(1)
• Starting(8)
Unknown(0) and No
Contact(12).
• Stopping(9)
• In Service(11)
• Dormant(15)
• Power Mode(18)
Has higher severity level
than the states OK(2)
and Completed(17).
Has less severity level than the
states OK(2) and
Completed(17).
• Unknown(0)
• No Contact(12)
Has the lowest severity
level.
Has the highest severity level.
• OK(2)
• Completed(17)
12 HP-UX WBEM Fibre Channel Provider Release Notes