HP-UX WBEM FC (Fibre-Channel) Provider Release Notes (766962-001, March 2014)

Table 16 B.11.31.1103.14 (continued)
DescriptionDefect ID
This defect is fixed in the current release, and the event descriptions do not contain these special
characters.
The consolidated status provider displays the overall status of the IO subsystem based on the
GroupOperationalStatus property severity level. The severity levels associated for the
QXCR1001066416
GroupOperationalStatus property values during the previous release and the current release
are tabulated below.
Table 17 QXCR1001066416
Previous severity LevelCurrent severity Level
Subsystem
GroupOperationalStatus
Has higher severity level
than the states
Has less severity level than the states
Unknown(0) and No
Contact(12).
• Other(1)
• Starting(8)
Unknown(0) and No
Contact(12).
• Stopping(9)
• In Service(11)
• Dormant(15)
• Power Mode(18)
Has higher severity level
than the states OK(2) and
Completed(17).
Has less severity level than the states
OK(2) and Completed(17).
• Unknown(0)
• No Contact(12)
Has the lowest severity
level.
Has the highest severity level.
• OK(2)
• Completed(17)
Defect fixes in B.11.31.1103 release
Table 18 B.11.31.1103
DescriptionDefect ID
In the previous release, the FC (Fibre-Channel) Instance provider does not display correct Speed and
Max Speed values for the following FC (Fibre-Channel) adapters:
QXCR1001038978
• 451871-B21 PCIe 2-port 8Gb QLogic Mezzanine FC (Fibre-Channel) adapter
• AH400A PCIe 1-port 8Gb Qlogic FC (Fibre-Channel) adapter
• AH401A PCIe 2-port 8Gb Qlogic FC (Fibre-Channel) adapter
• 456972-B21 PCIe 2-port 8GB Emulex FC (Fibre-Channel) adapter
In the current release, the SNIA library call is modified to handle the above listed adapters. The SNIA
library call retrieves the Speed and Max Speed values for the adapters and enables the FC
(Fibre-Channel) Instance provider to display appropriate values for these fields.
In the previous release, on BL870c i2 platform, the FC (Fibre-Channel) adapter test command:QXCR1001058688
#/opt/fcprovider/bin/FC_Provider_test -d
fails to generate events for all subsequent FC (Fibre-Channel) adapters available on the system if the
first instance of the adapter is not supported by the HPUXFCNativeIndicationProviderModule.
This defect is fixed in the current release on BL870c i2 platform. The Fiber-Channel adapter tests
are enhanced to send events for all the monitored paths even if the first instance of the adapter is not
supported by the HPUXFCNativeIndicationProviderModule.
In the previous release on HP-UX 11i v3 OS, enumeration of classes available in FC (Fibre-Channel)
Instance provider and FC (Fibre-Channel) Consolidated Status provider fails for a user with non-root
privileges.
QXCR1001068706
Defects fixed in various versions 13