HP-UX WBEM DAS (Direct Attached Storage) Provider Release Notes (766961-001, March 2014)

Table 20 B.11.31.1103 (continued)
DescriptionDefect ID
In the previous release, when the command evweb eventviewer is run
on BL870c i2 platform, the field Latest information on this
event displays incorrect location for the event details page.
QXCR1001083536
In the current release, when the command evweb eventviewer is run on
BL870c i2 platform, the field Latest information on this event
displays the correct location as: Events and their information for the event
details page.
In the previous release, the HPUXStorageNativeProviderModule leaks
memory, on legacy Integrity and BL870c i2 platforms, when the module
receives an evm notification about the IO subsystem status change.
QXCR1001075851
This defect has been fixed in this release.
Defect fixes in B.11.31.1009 version
Table 21 B.11.31.1009
DescriptionDefect ID
In the previous release, the HPUXStorageNativeProviderModule dumps
core when directly attached disk, which is not supported by HP disk firmware,
is removed from HP Superdome 2 platform.
QXCR1001008709
This defect has been fixed in this release.
In the previous release, when the evweb logviewer command is run on
the new Integrity platform, the Sense code and Information field
QXCR1000992649
values of the Native indication provider are displayed in integer format.
These values must be displayed in Hexadecimal format.
In the current release, the Sense code and Information field values
of the Native indication provider are displayed in Hexadecimal format when
the evweb logviewer command is run on all the platforms.
In the previous release, DAS (Direct Attached Storage) Provider event details
were not formatted correctly on legacy systems.
QXCR1000993005
This defect has been fixed in this release.
While installing the WBEMP-Storage module, version B.11.31.0903 on
HP-UX system, a temporary file /diskaldata is created and does not get
deleted after successful installation.
QXCR1000996182
In the current version of the product, the temporary file gets deleted after
successful installation of the module.
In the previous release, DAS (Direct Attached Storage) indication and
Consolidated Status provider displays erroneous data on HP Virtual Machine
guest systems.
QXCR1001022697
In this release, DAS (Direct Attached Storage) indication and Consolidated
Status providers are disabled on HP Virtual Machine guest systems.
In the previous release, the Disk exerciser tool (shipped in the product bundle)
does not work after bundle installation or upgrade. The cimserver or the
QXCR1001023857
CDM-ProvidersModule has to be restarted to make the Disk exerciser
tool work.
This defect has been fixed in this release and the Disk exerciser tool works
correctly after the bundle installation or upgradation.
In the previous release, DAS (Direct Attached Storage) indication provider
does not display multiple IP addresses supported for a system.
QXCR1000996827/
QXCR1001023213
16 DAS (Direct Attached Storage) provider release notes for March 2014 release