Veritas Volume Manager 5.1 SP1 Troubleshooting Guide (5900-1507, April 2011)

or vxmend. Verify the running state of the vxconfigd process. If necessary, restart
the vxconfigd process.
V-5-1-15861
VxVM command ERROR V-5-1-15861 Command is not supported for command
shipping. Operation must be executed on master.
Description:
On the slave, when you run a command that changes the configuration for a shared
disk group, CVM ships the command to the master for execution. The message
occurs when you run a command on the slave node that is not supported for
shipping to the master. The commands that are not supported are listed in the
file /etc/vx/vxcommandship.exclude.
For a list of CVM commands that are supported for executing on the slave node,
see the Veritas Volume Manager Administrator's Guide.
Recommended action:
Run the command on the CVM master node.
V-5-1-15917
VxVM command INFO V-5-1-15917 Command is executing on master through
command shipping. Attempting to kill remote command with client
id:clid
Description:
On the slave node, if you run a command that involves configuration changes for
a shared disk group, CVM ships the command to the master node and executes
the command on the master. The message occurs on the slave node, when you
issue CTRL-C to terminate a shipped command that is currently executing on the
master node.
Recommended action:
Verify the state of the VxVM objects using query commands such as vxprint or
vxdisk list. Since the command exited during execution, the command might
have left some stale entries. Clear the stale entries using commands such as vxedit
or vxmend.
V-5-1-0
VxVM command ERROR V-5-1-0 Command terminated during command shipping.
Check status manually.
Error messages
Types of messages
120