Veritas Volume Manager 5.1 SP1 Administrator"s Guide (5900-1506, April 2011)
If the new disk group may be moved between different operating system
platforms, enter y. Otherwise, enter n.
6
At the following prompt, either press Return to accept the default disk name
or enter n to allow you to define your own disk names:
Use default disk names for the disks? [y,n,q,?] (default: y) n
7
When prompted whether the disks should become hot-relocation spares,
enter n (or press Return):
Add disks as spare disks for disk group name? [y,n,q,?]
(default: n) n
8
When prompted whether to exclude the disks from hot-relocation use, enter
n (or press Return).
Exclude disks from hot-relocation use? [y,n,q,?}
(default: n) n
9
You are next prompted to choose whether you want to add a site tag to the
disks:
Add site tag to disks? [y,n,q,?] (default: n)
A site tag is usually applied to disk arrays or enclosures, and is not required
unless you want to use the Remote Mirror feature.
If you enter y to choose to add a site tag, you are prompted to the site name
at step 11.
10
To continue with the operation, enter y (or press Return) at the following
prompt:
The selected disks will be added to the disk group
disk group name with default disk names.
list of device names
Continue with operation? [y,n,q,?] (default: y) y
11
If you chose to tag the disks with a site in step 9, you are now prompted to
enter the site name that should be applied to the disks in each enclosure:
The following disk(s):
list of device names
belong to enclosure(s):
111Administering disks
Adding a disk to VxVM