Veritas Volume Manager 5.0.1 Troubleshooting Guide, HP-UX 11i v3, First Edition, November 2009

V-5-1-577
VxVM vxconfigd WARNING V-5-1-577 Disk group group: Disk group log
may be too small Log size should be at least number blocks
Description:
The log areas for the disk group have become too small for the size of configuration
currently in the group. This message only occurs during disk group import; it can
only occur if the disk was inaccessible while new database objects were added to
the configuration, and the disk was then made accessible and the system restarted.
This should not normally happen without first displaying a message about the
database area size.
Recommended action:
Reinitialize the disks in the group with larger log areas. Note that this requires
that you restore data on the disks from backups.
See the vxdisk(1M) manual page.
To reinitialize all of the disks, detach them from the group with which they are
associated, reinitialize and re-add them. Then deport and re-import the disk group
to effect the changes to the log areas for the group.
V-5-1-579
VxVM vxconfigd ERROR V-5-1-579 Disk group group: Errors in some
configuration copies: Disk disk, copy number: [Block number]:
reason...
Description:
During a failed disk group import, some of the configuration copies in the named
disk group were found to have format or other types of errors which make those
copies unusable. This message lists all configuration copies that have uncorrected
errors, including any appropriate logical block number. If no other reasons are
displayed, then this may be the cause of the disk group import failure.
Recommended action:
If some of the copies failed due to transient errors (such as cable failures), then a
reboot or re-import may succeed in importing the disk group. Otherwise, the disk
group configuration may have to be restored.
See “Restoring a disk group configuration” on page 57.
89Error messages
Types of messages