Veritas Volume Manager 5.0.1 Troubleshooting Guide, HP-UX 11i v3, First Edition, November 2009

This error indicates that the volume cannot be started because it does not contain
any valid plexes. This can happen, for example, if disk failures have caused all
plexes to be unusable. It can also happen as a result of actions that caused all
plexes to become unusable (for example, forcing the dissociation of subdisks or
detaching, dissociation, or offlining of plexes).
Recommended action:
It is possible that this error results from a drive that failed to spin up. If so,
rebooting may fix the problem. If that does not fix the problem, then the only
recourse is to repair the disks involved with the plexes and restore the file system
from a backup.
V-5-1-121
VxVM vxconfigd NOTICE V-5-1-121 Detached disk disk
Description:
The named disk appears to have become unusable and was detached from its disk
group. Additional messages may appear to indicate other records detached as a
result of the disk detach.
Recommended action:
If hot-relocation is enabled, Veritas Volume Manager objects affected by the disk
failure are taken care of automatically. Mail is sent to root indicating what actions
were taken by VxVM and what further actions the administrator should take.
V-5-1-122
VxVM vxconfigd WARNING V-5-1-122 Detaching plex plex from volume
volume
Description:
This error only happens for volumes that are started automatically by vxconfigd
at system startup (that is, the root and /usr file system volumes). The plex is
being detached as a result of I/O failure, disk failure during startup or prior to the
last system shutdown or crash, or disk removal prior to the last system shutdown
or crash.
Recommended action:
To ensure that the root or /usr file system retains the same number of active
mirrors, remove the given plex and add a new mirror using the vxassist mirror
operation. Also consider replacing any bad disks before running this command.
Error messages
Types of messages
78