Veritas Volume Manager 5.0.1 Troubleshooting Guide, HP-UX 11i v3, First Edition, November 2009

V-5-0-146
VxVM vxdmp NOTICE V-5-0-146 enabled controller controller_name
connected to disk array disk_array_serial_number
Description:
All paths through the controller connected to the disk array are enabled. This
usually happens if a controller is enabled after maintenance.
Recommended action:
No recovery procedure is required.
V-5-0-147
VxVM vxdmp NOTICE V-5-0-147 enabled dmpnode dmpnode_device_number
A DMP node has been marked enabled in the DMP database. This happens when
at least one path controlled by the DMP node has been enabled.
Recommended action:
No recovery procedure is required.
V-5-0-148
VxVM vxdmp NOTICE V-5-0-148 enabled path path_device_number belonging
to dmpnode dmpnode_device_number
Description:
A path has been marked enabled in the DMP database. This path is controlled by
the DMP node indicated by the specified device number. This happens if a
previously disabled path has been repaired, the user has reconfigured the DMP
database using the vxdctl(1M) command, or the DMP database has been
reconfigured automatically.
Recommended action:
No recovery procedure is required.
V-5-0-164
VxVM vxio WARNING V-5-0-164 Failed to join cluster name, aborting
Description:
A node failed to join a cluster. This may be caused by the node being unable to see
all the shared disks. Other error messages may provide more information about
the disks that cannot be found.
Error messages
Types of messages
70