Veritas Volume Manager 5.0.1 Troubleshooting Guide, HP-UX 11i v3, First Edition, November 2009

Description:
A path has been marked disabled in the DMP database. This path is controlled by
the DMP node indicated by the specified device number. This may be due to a
hardware failure.
Recommended action:
Check the underlying hardware if you want to recover the desired path.
V-5-0-144
VxVM vxio WARNING V-5-0-144 Double failure condition detected on
RAID-5 volume
Description:
I/O errors have been received in more than one column of a RAID-5 volume.
The error can be caused by one of the following problems:
■ a controller failure making more than a single drive unavailable
■ the loss of a second drive while running in degraded mode
■ two separate disk drives failing simultaneously (unlikely)
Recommended action:
Correct the hardware failures if possible. Then recover the volume using the
vxrecover command.
V-5-0-145
VxVM vxio WARNING V-5-0-145 DRL volume volume is detached
Description:
A Dirty Region Logging volume became detached because a DRL log entry could
not be written. If this is due to a media failure, other errors may have been logged
to the console.
Recommended action:
The volume containing the DRL log continues in operation. If the system fails
before the DRL has been repaired, a full recovery of the volume’s contents may
be necessary and will be performed automatically when the system is restarted.
To recover from this error, use the vxassist addlog command to add a new DRL
log to the volume.
69Error messages
Types of messages