Veritas Volume Manager 5.0.1 Troubleshooting Guide, HP-UX 11i v3, First Edition, November 2009

An attempt is being made to disable the one remaining active path to the root disk
controller.
Recommended action:
The path cannot be disabled.
V-5-0-55
VxVM vxio WARNING V-5-0-55 Cannot find device number for boot_path
vxvm vxdmp WARNING V-5-0-55 Cannot find device number for boot_path
Description:
The boot path retrieved from the system PROMs cannot be converted to a valid
device number.
Recommended action:
Check your PROM settings for the correct boot string. If a target driver, such as
an ATF, coexists with VxVM, and the target driver claims the boot disk, the message
may be ignored if the device path corresponds to the boot disk.
V-5-0-64
VxVM vxio WARNING V-5-0-64 cannot log commit record for Diskgroup
bootdg: error 28
Description:
This message usually means that multipathing is misconfigured.
Recommended action:
Possible causes and solutions are similar to the message V-5-1-5929.
See “V-5-1-5929” on page 114.
V-5-0-106
VxVM vxio WARNING V-5-0-106 detaching RAID-5 volume
Description:
Either a double-failure condition in the RAID-5 volume has been detected in the
kernel or some other fatal error is preventing further use of the array.
Recommended action:
If two or more disks have been lost due to a controller or power failure, use the
vxrecover utility to recover them once they have been re-attached to the system.
67Error messages
Types of messages