Veritas Volume Manager 5.0.1 Migration Guide, HP-UX 11i v3, First Edition, November 2009

Table A-1
Conversion error messages (continued)
DescriptionMessage
If you attempt to convert a Mirrored LVM Volume
Group without a valid VxVM license installed, the
conversion is not allowed.
Install the required license before attempting the
conversion.
This Volume Group contains one or more logical
volumes with mirrored data
If there is insufficient private space, the
conversion is not allowed to continue. Also, the
conversion records already generated are removed
such that in the event of an unexpected crash and
reboot, the conversion cannot proceed
automatically.
You can reduce the number of logical volumes in
volume group by combining some of the logical
volumes together, or by aborting. You can restart
the conversion process later with fewer volumes
in the group.
Too many LVM Volumes to convert in this LVM
Volume Group
The conversion process was unable to deactivate
the volume group. The conversion cannot proceed
without reboots being done. If you choose to not
reboot your system, the conversion is aborted.
The system responds with an option to complete
the conversion by rebooting the system.
vgchange: Couldn't deactivate volume group
/dev/vol_grp
The system detects that the vxdiskadd or
vxvmconvert program is already running.
Retry at a later time. Otherwise, if you are certain
that no other users are running either of these
programs, remove the file .DISKADD.LOCK from
the /var/spool/locks directory to allow you
to run vxvmconvert.
vxdiskadm or vxvmconvert is already being run
and these programs cannot run concurrently
This message occurs while converting an LVM
version 2 volume group to VxVM. You can only
convert LVM version 1 volume groups.
LVM Volume Group Volume Group name reports a
version 2.0
LVM Volume Group other than version 1.0 is not
supported for conversion.
81Conversion error messages
About conversion error messages