Veritas Volume Manager 5.0.1 Migration Guide, HP-UX 11i v3, First Edition, November 2009

list List disk information

listvg List LVM Volume Group information

? Display help about menu

?? Display help about the menuing system

q Exit from menus

Select an operation to perform: 1

Analyze one or more LVM Volume Groups

Menu: Volume Manager/LVM_Conversion/Analyze_LVM_VGs

Use this operation to analyze one or more LVM volume groups for

possible conversion using the VxVM Volume Manager. This

operation checks for problems that would prevent the conversion

from completing successfully. It calculates the space required

to add the volume groups disks to a Volume Manager disk group,

and to replace any existing partitions and volumes with Volume

Manager volumes, plexes, and sub-disks.

More than one volume group or pattern may be entered at the

prompt.

Here are some LVM volume group selection examples:

all: analyze all LVM Volume Groups (all except Root VG)

listvg: list all LVM Volume Groups

list: list all disk devices

vg_name:a single LVM Volume Group, named vg_name

<pattern>: for example vg08 vg09 vg05

Select Volume Groups to analyze :

[<pattern-list>,all,list,listvg,q,?] vg08

Name a new disk group [<group>,list,q,?] (default: dg08)

The following disk has been found in the vg08 volume group and

will be analyzed for VxVM conversion.

disk12

To allow analysis, a new VxVM disk group, dg08, will be

fabricated and the disk device disk12 will be added to the disk

group with the disk name dg0801.

The disk12 disk has been configured for conversion.

The first stage of the Analysis process has completed

successfully.

Second Stage Conversion Analysis of vg08

Analysis of vg08 found insufficient Private Space for conversion

Converting LVM to VxVM

Examples