Veritas Volume Manager 5.0 Troubleshooting Guide, HP-UX 11i v3, First Edition, May 2008

95Error messages
Understanding messages
V-5-1-4267
VxVM vxassist WARNING V-5-1-4267 volume volume already has at least
one snapshot plex
Snapshot volume created with these plexes will have a dco volume
with no associated dco plex.
■ Description: An error was detected while adding a DCO object and DCO
volume to a mirrored volume. There is at least one snapshot plex already
created on the volume. Because this snapshot plex was created when no DCO
was associated with the volume, there is no DCO plex allocated for it.
■ Action: See the section “Adding a Version 0 DCO and DCO Volume” in the
chapter “Administering Volume Snapshots” of the Veritas Volume Manager
Administrator’s Guide.
V-5-1-4277
VxVM vxconfigd ERROR V-5-1-4277 cluster_establish: CVM protocol
version out of range
■ Description: When a node joins a cluster, it tries to join at the protocol
version that is stored in its volboot file. If the cluster is running at a
different protocol version, the master rejects the join and sends the current
protocol version to the slave. The slave re-tries with the current version (if
that version is supported on the joining node), or the join fails.
■ Action: Make sure that the joining node has a Veritas Volume Manager
release installed that supports the current protocol version of the cluster.
V-5-1-4551
VxVM vxconfigd ERROR V-5-1-4551 dg_move_recover: can’t locate
disk(s), giving up
■ Description: Disks involved in a disk group move operation cannot be found,
and one of the specified disk groups cannot be imported.
■ Action: Manual use of the vxdg recover command may be required to clean
the disk group to be imported. See “Recovering from incomplete disk group
moves” on page 24 for more information.
V-5-1-4620
VxVM vxassist WARNING V-5-1-4620 Error while retrieving information
from SAL
■ Description: The vxassist command does not recognize the version of the
SAN Access Layer (SAL) that is being used, or detects an error in the output
from SAL.