Veritas Volume Manager 5.0 Troubleshooting Guide, HP-UX 11i v3, First Edition, May 2008

93Error messages
Understanding messages
V-5-1-3243
VxVM vxdmpadm ERROR V-5-1-3243 The VxVM restore daemon is already
running. You can stop and restart the restore daemon with desired
arguments for changing any of its parameters.
■ Description: The vxdmpadm start restore command has been executed
while the restore daemon is already running.
■ Action: Stop the restore daemon and restart it with the required set of
parameters as shown in the
vxdmpadm(1M) manual page.
V-5-1-3362
VxVM vxdmpadm ERROR V-5-1-3362 Attempt to disable controller failed.
One (or more) devices can be accessed only through this controller.
Use the -f option if you still want to disable this controller.
■ Description: Disabling the controller could lead to some devices becoming
inaccessible.
■ Action: To disable the only path connected to a disk, use the -f option.
V-5-1-3486
VxVM vxconfigd ERROR V-5-1-3486 Not in cluster
■ Description: Checking for the current protocol version (using vxdctl
protocol version) does not work if the node is not in a cluster.
■ Action: Bring the node into the cluster and retry.
V-5-1-3689
VxVM vxassist ERROR V-5-1-3689 Volume record id rid is not found in
the configuration.
■ Description: An error was detected while reattaching a snapshot volume
using
snapback. This happens if a volume’s record identifier (rid) changes as
a result of a disk group split that moved the original volume to a new disk
group. The snapshot volume is unable to recognize the original volume
because its record identifier has changed.
■ Action: Use the following command to perform the snapback:
# vxplex [-g diskgroup] -f snapback volume plex