Veritas Volume Manager 5.0 Troubleshooting Guide, HP-UX 11i v3, First Edition, May 2008

92 Error messages
Understanding messages
V-5-1-3046
VxVM vxconfigd ERROR V-5-1-3046 Node activation conflict
■ Description: The disk group could not be activated because it is activated in a
conflicting mode on another node in a cluster.
■ Action: Retry later, or deactivate the disk group on conflicting nodes.
V-5-1-3049
VxVM vxconfigd ERROR V-5-1-3049 Retry rolling upgrade
■ Description: An attempt was made to upgrade a cluster to a higher protocol
version when a transaction was in progress.
■ Action: Retry the upgrade at a later time.
V-5-1-3050
VxVM vxconfigd ERROR V-5-1-3050 Version out of range for at least
one node
■ Description: Before trying to upgrade a cluster by running vxdctl
upgrade, all nodes should be able to support the new protocol version. An
upgrade can fail if at least one of them does not support the new protocol
version.
■ Action: Make sure that the Veritas Volume Manager package that supports
the new protocol version is installed on all nodes and retry the upgrade.
V-5-1-3091
VxVM vxdg ERROR V-5-1-3091 diskname : Disk not moving, but subdisks
on it are
■ Description: Some volumes have subdisks that are not on the disks implied
by the supplied list of objects.
■ Action: Use the -o expand option to vxdg listmove to produce a self-
contained list of objects.
V-5-1-3212
VxVM vxconfigd ERROR V-5-1-3212 Insufficient DRL log size: logging
is disabled.
■ Description: A volume with an insufficient DRL log size was started
successfully, but DRL logging is disabled and a full recovery is performed.
■ Action: Create a new DRL of sufficient size.