Veritas Volume Manager 5.0 Troubleshooting Guide, HP-UX 11i v3, First Edition, May 2008

91Error messages
Understanding messages
■ Action: Before retrying the join, use vxdg reminor (see the vxdg(1M)
manual page) to choose a new minor number range either for the disk group
on the master or for the conflicting disk group on the slave. If there are open
volumes in the disk group, the reminor operation will not take effect until
the disk group is deported and updated (either explicitly or by rebooting the
system).
V-5-1-3032
VxVM vxconfigd ERROR V-5-1-3032 Master sent no data
■ Description: During the slave join protocol, a message without data was
received from the master. This message is only likely to be seen in the case
of an internal VxVM error.
■ Action: Contact Veritas Technical Support.
V-5-1-3033
VxVM vxconfigd ERROR V-5-1-3033 Join in progress
■ Description: An attempt was made to import or deport a shared disk group
during a cluster reconfiguration.
■ Action: Retry when the cluster reconfiguration has completed.
V-5-1-3034
VxVM vxconfigd ERROR V-5-1-3034 Join not currently allowed
■ Description: A slave attempted to join a cluster when the master was not
ready. The slave will retry automatically.
■ Action: No action is necessary if the join eventually completes. Otherwise,
investigate the cluster monitor on the master.
V-5-1-3042
VxVM vxconfigd ERROR V-5-1-3042 Clustering license restricts
operation
■ Description: An operation requiring a full clustering license was attempted,
and such a license is not available.
■ Action: If the error occurs when a disk group is being activated, dissociate all
but one plex from mirrored volumes before activating the disk group. If the
error occurs during a transaction, deactivate the disk group on all nodes
except the master.