Veritas Volume Manager 5.0 Troubleshooting Guide, HP-UX 11i v3, First Edition, May 2008

84 Error messages

Understanding messages

V-5-1-2197

VxVM vxconfigd ERROR V-5-1-2197 node

: missing vxconfigd

■ Description: The vxconfigd daemon is not running on the indicated

cluster node.

■ Action: Restart the vxconfigd daemon.

V-5-1-2198

VxVM vxconfigd ERROR V-5-1-2198 node

: vxconfigd not ready

■ Description: The vxconfigd daemon is not responding properly in a

cluster.

■ Action: Stop and restart the vxconfigd daemon on the node indicated.

V-5-1-2274

VxVM vxconfigd ERROR V-5-1-2274 volume:vxconfigd cannot boot-start

RAID-5 volumes

■ Description: A volume that vxconfigd should start immediately upon

booting the system (that is, the volume for the /usr file system) has a RAID-

5 layout. The /usr file system should never be defined on a RAID-5 volume.

■ Action: It is likely that the only recovery for this is to boot VxVM from a

network-mounted root file system (or from a CD-ROM), and reconfigure the

/usr file system to be defined on a regular non-RAID-5 volume.

V-5-1-2290

VxVM vxdmpadm ERROR V-5-1-2290 Attempt to enable a controller that

is not available

■ Description: This message is returned by the vxdmpadm utility when an

attempt is made to enable a controller that is not working or is not

physically present.

■ Action: Check hardware and see if the controller is present and whether I/O

can be performed through it.