Veritas Volume Manager 5.0 Troubleshooting Guide, HP-UX 11i v3, First Edition, May 2008

65Error messages
Understanding messages
■ Action: None; the problem was corrected automatically. Note the location of
the failure for future reference. If the same region of the subdisk fails again,
this may indicate a more insidious failure and the disk should be
reformatted at the next reasonable opportunity.
V-5-0-258
VxVM vxdmp NOTICE V-5-0-258 removed disk array disk_array_serial_number
■ Description: A disk array has been disconnected from the host, or some
hardware failure has resulted in the disk array becoming inaccessible to the
host.
■ Action: Replace disk array hardware if this has failed.
V-5-0-386
VxVM vxio WARNING V-5-0-386 subdisk subdisk failed in plex plex in
volume volume
■ Description: The kernel has detected a subdisk failure, which may mean that
the underlying disk is failing.
■ Action: Check for obvious problems with the disk (such as a disconnected
cable). If hot-relocation is enabled and the disk is failing, recovery from
subdisk failure is handled automatically.
V-5-1-90
VxVM vxconfigd ERROR V-5-1-90 mode: Unrecognized operating mode
■ Description: An invalid string was specified as an argument to the -m option.
Valid strings are: enable, disable, and boot.
■ Action: Supply a correct option argument.
V-5-1-91
VxVM vxconfigd WARNING V-5-1-91 Cannot create device device_path:
reason
■ Description: vxconfigd cannot create a device node either under /dev/
vx/dsk or under /dev/vx/rdsk. This should happen only if the root file
system has run out of inodes.
■ Action: Remove some unwanted files from the root file system. Then,
regenerate the device node using the command:
# vxdctl enable