Veritas Volume Manager 5.0 Troubleshooting Guide, HP-UX 11i v3, First Edition, May 2008

58 Error messages
Understanding messages
Note: This message may also appear during a plex detach operation in a
cluster. In this case, no action is required.
V-5-0-34
VxVM vxdmp NOTICE V-5-0-34 added disk array disk_array_serial_number
■ Description: A new disk array has been added to the host.
■ Action: None.
V-5-0-35
VxVM vxdmp NOTICE V-5-0-35 Attempt to disable controller
controller_name failed. Rootdisk has just one enabled path.
■ Description: An attempt is being made to disable the one remaining active
path to the root disk controller.
■ Action: The path cannot be disabled.
V-5-0-55
VxVM vxio WARNING V-5-0-55 Cannot find device number for boot_path
■ Description: The boot path retrieved from the system PROMs cannot be
converted to a valid device number.
■ Action: Check your PROM settings for the correct boot string.
V-5-0-106
VxVM vxio WARNING V-5-0-106 detaching RAID-5 volume
■ Description: Either a double-failure condition in the RAID-5 volume has
been detected in the kernel or some other fatal error is preventing further
use of the array.
■ Action: If two or more disks have been lost due to a controller or power
failure, use the
vxrecover utility to recover them once they have been re-
attached to the system. Check for other console error messages that may
provide additional information about the failure.