Veritas Volume Manager 5.0 Troubleshooting Guide Guide (September 2006)

90 Error messages
Understanding messages
V-5-1-3091
VxVM vxdg ERROR V-5-1-3091 diskname : Disk not moving, but subdisks
on it are
■ Description: Some volumes have subdisks that are not on the disks implied by the
supplied list of objects.
■ Action: Use the -o expand option to vxdg listmove to produce a self-contained list
of objects.
V-5-1-3212
VxVM vxconfigd ERROR V-5-1-3212 Insufficient DRL log size: logging
is disabled.
■ Description: A volume with an insufficient DRL log size was started successfully,
but DRL logging is disabled and a full recovery is performed.
■ Action: Create a new DRL of sufficient size.
V-5-1-3243
VxVM vxdmpadm ERROR V-5-1-3243 The VxVM restore daemon is already
running. You can stop and restart the restore daemon with desired
arguments for changing any of its parameters.
■ Description: The vxdmpadm start restore command has been executed while
the restore daemon is already running.
■ Action: Stop the restore daemon and restart it with the required set of parameters as
shown in the
vxdmpadm(1M) manual page.
V-5-1-3362
VxVM vxdmpadm ERROR V-5-1-3362 Attempt to disable controller failed.
One (or more) devices can be accessed only through this controller.
Use the -f option if you still want to disable this controller.
■ Description: Disabling the controller could lead to some devices becoming
inaccessible.
■ Action: To disable the only path connected to a disk, use the -f option.
V-5-1-3486
VxVM vxconfigd ERROR V-5-1-3486 Not in cluster
■ Description: Checking for the current protocol version (using vxdctl protocol
version) does not work if the node is not in a cluster.
■ Action: Bring the node into the cluster and retry.