Veritas Volume Manager 5.0 Troubleshooting Guide Guide (September 2006)

87Error messages
Understanding messages
V-5-1-3020
VxVM vxconfigd ERROR V-5-1-3020 Error in cluster processing
■ Description: This may be due to an operation inconsistent with the current state of a
cluster (such as an attempt to import or deport a shared disk group to or from the
slave). It may also be caused by an unexpected sequence of commands from
vxclust.
■ Action: Perform the operation from the master node.
V-5-1-3022
VxVM vxconfigd ERROR V-5-1-3022 Cannot find disk on slave node
■ Description: A slave node in a cluster cannot find a shared disk. This is accompanied
by the syslog message:
VxVM vxconfigd ERROR V-5-1-2173 cannot find disk disk
■ Action: Make sure that the same set of shared disks is online on both nodes. Examine
the disks on both the master and the slave with the command vxdisk list and
make sure that the same set of disks with the shared flag is visible on both nodes. If
not, check the connections to the disks.
V-5-1-3023
VxVM vxconfigd ERROR V-5-1-3023 Disk in use by another cluster
■ Description: An attempt was made to import a disk group whose disks are stamped
with the ID of another cluster.
■ Action: If the disk group is not imported by another cluster, retry the import using the
-C (clear import) flag.
V-5-1-3024
VxVM vxconfigd ERROR V-5-1-3024 vxclust not there
■ Description: An error during an attempt to join a cluster caused vxclust to fail.
This may be caused by the failure of another node during a join or by the failure of
vxclust.
■ Action: Retry the join. An error message on the other node may clarify the problem.
V-5-1-3025
VxVM vxconfigd ERROR V-5-1-3025 Unable to add portal for cluster
■ Description: vxconfigd was not able to create a portal for communication with the
vxconfigd on the other node. This may happen in a degraded system that is
experiencing shortages of system resources such as memory or file descriptors.