Veritas Volume Manager 5.0 Release Notes (5900-0593, March 2010)

Veritas Volume Manager 5.0 Release Notes
Known Issues
Chapter 116
— HP StorageWorks XP48 and XP512 Disk Array
— HP StorageWorks Virtual Array 74xx
Known Issues
The following known problems and workarounds have been identified:
• “Installation Issues” on page 16
• “Utility Issues” on page 17
• “DMP Issues” on page 21
• “Device Issues” on page 21
• “Hot-Relocation Issues” on page 22
• “Cluster Functionality Issues” on page 23
• “Remote Mirror issues” on page 24
• “Snapshot and Snapback Issues” on page 26
• “Intelligent Storage Provisioning (ISP) Issues” on page 26
• “Miscellaneous Issues” on page 27
• “Veritas Enterprise Administrator Issues” on page 28
• “Internationalization Issues” on page 30
Installation Issues
• Upgrading Systems Running VxVM 3.5 Prior to Command Cumulative Patch 06
Before upgrading a system that is running under VxVM 3.5 at a patch level prior to
Command Cumulative Patch 06 (PHCO_30834); it is strongly recommended that you
download and apply this patch, and then run the ckpublen.sh utility script as
documented in TechNote 270407, available at: http://
support.Veritas.com/docs/270407. If the script reports that any disks need to be
re-initialized, back up the file systems and data residing on the volumes on those disks,
and restore them after re-initializing the disks and recreating the volumes. You can then
proceed to upgrade the system with the Veritas Volume Manager 5.0 software.