VERITAS Volume Manager 5.0 Migration Guide (September 2006)

73Conversion error messages
This Volume Group contains one or
more logical volumes with
mirrored data
If you attempt to convert a Mirrored LVM
Volume Group without a valid VxVM license
installed, the conversion is not allowed.
Install the required license before attempting the
conversion.
Too many LVM Volumes to convert
in this LVM Volume Group
If there is insufficient private space, the
conversion is not allowed to continue. Also, the
conversion records already generated are
removed such that in the event of an unexpected
crash and reboot, the conversion cannot proceed
automatically.
You can reduce the number of logical volumes in
volume group by combining some of the logical
volumes together, or by aborting. You can restart
the conversion process later with fewer volumes
in the group.
vgchange: Couldn't deactivate
volume group /dev/vol_grp
The conversion process was unable to deactivate
the volume group. The conversion cannot
proceed without reboots being done. If you
choose to not reboot your system, the conversion
is aborted.
The system responds with an option to complete
the conversion by rebooting the system.
vxdiskadm or vxconvert is
already being run and these
programs cannot run concurrently
The system detects that the vxdiskadd or
vxconvert program is already running.
Retry at a later time. Otherwise, if you are
certain that no other users are running either of
these programs, remove the file
.DISKADD.LOCK from the
/var/spool/locks directory to allow you
to run vxconvert.
Table A-1 Conversion error messages
Message Description