Veritas Volume Manager 5.0 Migration Guide, HP-UX 11i v3, First Edition, May 2008

77Conversion error messages
The conversion process was
unable to deactivate the volume
group
vol_grp_name
This indicates that the conversion process
cannot deactivate the volume group.
The conversion cannot be completed
without rebooting the machine. If you
cannot afford to reboot, then choose abort
and try again later.
This Volume Group contains one or
more logical volumes with
mirrored data
If you attempt to convert a Mirrored LVM
Volume Group without a valid VxVM
license installed, the conversion is not
allowed.
Install the required license before
attempting the conversion.
Too many LVM Volumes to convert
in this LVM Volume Group
If there is insufficient private space, the
conversion is not allowed to continue. Also,
the conversion records already generated
are removed such that in the event of an
unexpected crash and reboot, the
conversion cannot proceed automatically.
You can reduce the number of logical
volumes in volume group by combining
some of the logical volumes together, or by
aborting. You can restart the conversion
process later with fewer volumes in the
group.
vgchange: Couldn't deactivate
volume group /dev/vol_grp
The conversion process was unable to
deactivate the volume group. The
conversion cannot proceed without reboots
being done. If you choose to not reboot your
system, the conversion is aborted.
The system responds with an option to
complete the conversion by rebooting the
system.
Table A-1 Conversion error messages
Message Description